|
C14 |
|
100 Base-T BI-DI Ethernet Media Converter |
|
The NMC3212 & DZC-NMC3213 Converters comply with IEEE802.3, IEEE802.3u, IEEE802.3x Standards. It is designed to convert data signals between 10/100 Base-Tx and 10/100 Base-Fx fast Ethernet. This 2 Wavelength WDM Converter is designed to extend a copper based network up to 20KM through a single optical fiber and provide Bi-Directional communications. The converter is equipped with one fiber optic connector, two RJ-45 Jacks and one external power supply jack. Nine LED indicators are built-in for easy diagnostics - Ethernet Link, Ethernet Activity, Fiber Link, Fiber Activity, Full duplex and data rates. It can be configured automatically for Full Duplex or Half Duplex operation. It is a compact, cost-effective, highly reliable and stable.
Main Features: · MeetsIEEE802.3u 10/100BaseTX and 10/100BaseFX standards · Plug-and-Play installation · 2 Wavelength WDM Technology · High quality and excellent reliability · Full-duplex 10/100Mbps Ethernet operation up to 20Km · Two RJ45 ports · 9 diagnostic and monitoring LEDs for power status, FX link/ACT, TX link/ACT
|
|
DZC-NMC3212 & DZC-NMC3213 |
|
1000M bi-di Ethernet Media Converter |
|
DZC-NMC-3672 & DZC-NMC-3673 |
|
The DZC-NMC-3672 & DZC-NMC-3673 comply with IEEE802.3, IEEE802.3u, IEEE802.3x Standards. They are designed to convert a data signal between 1000 Base-Tx and 1000 Base-Fx fast Ethernet. The 2 Wavelength WDM Converter is designed transmit data across 20KM or 40KM (depending on the model number) through a single optic fiber cable. The Converter is equipped with two fiber optic connectors (One for transmitting-Tx and another for receiving-Rx), two RJ-45 Jacks and one internal switching power supply. Six LED indicators are built-in for easy diagnosing and monitoring the status of power, Ethernet Link, Ethernet Activity, Fiber Link, Fiber Activity, Full duplex and data rates. It can be configured automatically for Full Duplex or Half Duplex operation. It is compact, cost-effective, low dissipative, highly reliable and stable. It can be used in standalone applications with a 220VAC or 48VDC power supply
|
